[ProductDetail_TopEspot]
[ProductDetail_RightEspot]
[PDP_FEATUREDIN_Espot]
[ProductDetail_BLOG_TOUT_ESPOT]
[ProductDetail_KEEP_EXPLORING_ESPOT_Bottom]
Please enter valid email address. Your password will be reset and sent to your email account.
Enter your Email Address and click 'Continue'
Example: name@domain.com Submit Cancel Forgot Password Close /GarnetHill/US/Global/Popups/forgot_password Enter your email address

16
10 0
true
false
false
true
false pdp {"scheme":"product1_cr"}
false pdp {"scheme":"product2_cr"}
[ProductDetail_Espot01]
[ProductDetail_Espot02]
Tulip Bed is rated 5.0 out of 5 by 7.
Rated 5 out of 5 by from Love my new bed! First of all, it's as beautiful as it looks in the pictures. And it's solid wood, which seems increasingly harder to find. But when I put the bed together, I was especially impressed with the workmanship. Every joint fit perfectly. Every screw hole was straight. It took a while to assemble (and once I needed an assist), but that was only because I was taking my time and I wanted to be sure I would damage it. Note: It's higher than I expected it to be. So before you buy it, get out your tape measure and see the other posts.
Date published: 2020-05-16
Rated 5 out of 5 by from Beautiful bed This is a beautiful bed. It has a beautiful finish, and a lovely, old-fashioned look. Assembly was required, though instructions were clear and tools were provided. A few comments. This bed was not available in California King, which required me to buy a new mattress. Cal King should be a basic requirement for beds sold at GH. Secondly, the mattress/box spring recommendations by GH are quite specific. We instead bought a 13 inch mattress with a two inch “box spring platform” and it works fine and looks beautiful. The mattress is about 29 1/2 inches off the floor. The bed probably could accommodate a slightly thicker mattress/box spring combo if the purchaser already owned this. (A significantly thinner combination would cause a gap between the mattress and the headboard, allowing the pillows to fall through). I hope this info is useful to others who are considering this purchase.
Date published: 2020-01-22
Rated 5 out of 5 by from Very happy We bought this bed for our daughters room . We love the bed . It is very well made and beautiful.
Date published: 2020-01-04
Rated 5 out of 5 by from Solid and good looking We are very happy with the bed. It is handsome, and best of all, feels solid and substantial. We waited many years to find the right bed, and are glad we did.
Date published: 2019-05-04
Rated 5 out of 5 by from Beautiful design It has not arrived yet but I know I will love it for years to come!
Date published: 2018-05-01
Rated 5 out of 5 by from I loved the scale of this bed for my smaller sized bedroom. Its simple design is handsomely accented with the tulip finials. I ordered it in the cherry stain and I like its warm color. A word of caution, it requires a half-height box spring. Even with that, it makes for quite a high bed. Short people will literally have to jump into bed. Sitting on the edge of the bed is difficult even for a tall person like me.Expensive purchase especially with shipping and handling. Buy it on sale.
Date published: 2016-10-28
  • y_2020, m_9, d_23, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_6026, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_garnethill
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 24ms
  • REVIEWS, PRODUCT

How does the Tulip bed accept a mattress? Does a normal foundation/box spring sit inside the rails? Or does it come with slats for holding top mattress? Also, how high is the rail from the floor?

Asked by: jsb2
Yes, this bed accepts a mattress. We recommend a 8" deep mattress & 7" deep box spring as anything deeper will hide bottom portion of headboard. This bed must have a box spring. The measurement from floor to top of rail is 19" .
Answered by: Cherieghcs
Date published: 2019-03-23

Could I use only my 15" mattress that is "intended to be used without a box spring/foundation"?

Asked by: KRGbeds
We recommend an 8" deep mattress and 7" deep box spring (anything deeper will hide bottom portion of headboard). It must have box spring.
Answered by: DeniseGHCS
Date published: 2019-02-09

Is there a weight limit for the box spring and mattress that can be used on this bed?

Asked by: vresut
We recommend 8" deep mattress & 7" deep box-spring (anything deeper will hide bottom portion of headboard). Our vendor recommends extra slats if there is a weight concern.
Answered by: Cherieghcs
Date published: 2018-07-26

is the tulip bed pictured with a half height boxspring? Someone had said it was way too high without one. Are there slats underneath for the boxspring,(king size), or just metal anchors on the sides? Where is this bed made? thanks, Kate

Asked by: katemn
We recommend an 8" deep mattress & 7" deep box-spring, anything deeper will hide the bottom portion of the headboard. There are (3) "L"-shaped angle irons on each side rail (top/middle/bottom) with 3 slats: slats are 3/4" thick to support the box-spring. The bed is made in Rhode Island, USA.
Answered by: Cherieghcs
Date published: 2019-03-23

what is the dimension from the floor to where the bottom of the box spring would rest.  (Trying to figure out how high the mattress would be off the floor.  thank you

Asked by: stage
The measurement from the floor to where the bottom of the box spring would rest is 12".
Answered by: Cherieghcs
Date published: 2019-03-23

Can you tell me the height of bed from floor to bottom of foot rail?

Asked by: slothdesigner
The distance between the floor to the bottom of the foot rail is 12".
Answered by: LynnGHCS
Date published: 2019-03-23

Can this bed be used without a box spring.  I have a king, 13-14 inch deep mattress...Can this fit the bed frame? What supports the mattress?  Slats or flat board?

Asked by: penniM
We recommend an 8" deep mattress and 7" deep boxspring (anything deeper will hide bottom portion of headboard). It must have Box Spring. There are three slats to support the mattress and boxspring.
Answered by: LynnGHCS
Date published: 2019-03-23

Can this bed accommodate the new taller twin box springs and mattresses?

Asked by: nancy65
We recommend an 8" deep mattress and 7" deep boxspring (anything deeper will hide the bottom portion of the headboard). A Box Spring is required.
Answered by: LynnGHCS
Date published: 2018-02-19

How high is the rail (lip that mattress sits on) from the floor?

Asked by: Aleta
The measurement from the floor to the bottom of the rail is 12".
Answered by: DeniseGHCS
Date published: 2017-11-16

will this bed take a regular mattress and box spring? Can I use just a mattress with it? will the graining with knots shown in the picture be similar in all the beds, within reason...do they all have some graining detail?

Asked by: kittennose
We recommend using an 8" mattress and 7" box spring. A box spring is required. These are handmade to order and no two beds will be exactly the same as each will have the natural grain of the wood. There should be graining on all of the beds but it will always vary.
Answered by: DeniseGHCS
Date published: 2017-11-08

Which does GH sell more of, the white or the cherry stain? Is it an option to pick up the frame? I live in Maine & am thinking it would be wicked convenient if I could swing by & pick it up from your NH location/s. 

Asked by: JAM73
The cherry stain is the biggest seller in this beautiful bed. As the bed is made to order, it is shipped directly to the delivery address and is not available for pick up.
Answered by: DeniseGHCS
Date published: 2017-10-20

Can a bed skirt be used on this? Would it go behind the wood slats on the sides? Also, can a 5" box spring and 11" mattress work?

Asked by: Megmh
Yes, you can use a bedskirt, but it would hide the wood side panels. We recommend an 8" deep mattress & 7" deep boxspring (anything deeper will hide bottom portion of the headboard). A box spring is required.
Answered by: DeniseGHCS
Date published: 2017-10-17

Can I use a wood slat base instead of a box spring?

Asked by: shauny
We do not recommend a wood slat as it may make the mattress sit low on the bed.
Answered by: ErinGHCS
Date published: 2017-05-31

Could you clarify whether the maple color is the darker or lighter of the two different wood colors shown.

Asked by: MSTF
It is the lighter of the pictures.
Answered by: HollyGHCS
Date published: 2017-01-11

What is the underbed clearance from the bottom of the siderails to the floor? And does the king size have support posts in the middle?

Asked by: AmandaAE
The clearance is 12". The king has 3 support legs along the center of the bed.
Answered by: ErinGHCS
Date published: 2018-02-23

Does this bed require a box spring, or can it be used with only a mattress?

Asked by: nkdy
A box spring is required for this bed.
Answered by: DeniseGHCS
Date published: 2016-11-22

Where are the sheets on the tulip bed? I want to purchase. Peacock blue, green and some red and they are patterned.

Asked by: Princetonhomeandgarden
This bedding was the Grandstand Floral Flannel Bedding. This bedding is has sold out and is no longer available.
Answered by: ErinGHCS
Date published: 2016-11-01

What is the name of the manufacturer of the tulip bed?

Asked by: JoeB
The vendor for the bed does not wish to have their information shared. The bed is made in the USA though.
Answered by: JennyGHCS
Date published: 2018-12-27

Does the special handling include carrying it upstairs and removing the packing materials? How heavy is the bed?

Asked by: Solitary
This is threshold delivery only. The boxes are brought into the home only; packaging is not removed. Twin: 1 box= 28 lbs 1 box= 33 lbs 1 box= 34 lbs Double: 1 box= 45 lbs 1 box= 33 lbs 1 box= 34 lbs Queen: 1 box= 56 lbs 1 box= 33 lbs 1 box= 34 lbs King: 1 box= 80 lbs 1 box= 33 lbs 1 box= 34 lbs
Answered by: DeniseGHCS
Date published: 2017-11-06

What size dust ruffle?

I'm looking for a bed very high off the floor, where the top mattress hits me mid hip-I want a bed that must use a 21" dust ruffle-what length ruffle does this use? Thank you.
Asked by: liamsmom
The size of the dust ruffle, would depend on how high the box spring is going to be.
Answered by: HollyGHCS
Date published: 2013-10-22

Twin mattress size?

Does this take a regular twin mattress or a twin XL mattress?
Asked by: rosieroll
This takes a regular twin mattress.
Answered by: HollyGHCS
Date published: 2013-10-22

Is the bed solid wood, veneer, or a combination? Are there any other woods than maple used in its construction?

Asked by: SandiJ
It is solid maple hardwood.
Answered by: HollyGHCS
Date published: 2014-05-30

How high does the bed with mattress and box spring rise from the floor?

You recommend use of the bed with an 8" mattress and a 7" box spring. Once these are on the bed, how high will the top of the mattress be from the floor? Alternatively, how high off the floor does the bottom of the box spring sit?
Asked by: Cat999
The top of the mattress will be 27" from the floor. From the floor to the bottom of the rail is 12".
Answered by: ChantelGHCS
Date published: 2016-10-17

Does the tulip bed in single-size accommodate a standard USA box spring & mattress? Also, does delivery include all assembly? Thanks

Asked by: David
There is no assembly done when the bed is delivered. We recommend an 8" deep mattress & 7" deep box spring (anything deeper will hide bottom portion of headboard). Must have Box Spring. Simple assembly required - Hardware included.
Answered by: ChantelGHCS
Date published: 2016-07-18

Where is this bed made? Where are the materials sourced?

Asked by: rbsang
The materials are sourced and the bed is made in the United States.
Answered by: DeniseGHCS
Date published: 2017-10-11

Can the Tulip Bed be ordered in California King size?

Asked by: Redl
Sorry, no. It is not offered in California King size.
Answered by: DeniseGHCS
Date published: 2020-07-10

I am buying a mattress and boxspring now.  What measurements mattress and box spring height measurements are needed to go with the king tulip bed?

Asked by: Anonymous

What is height of clearance under bed? That is, how high from floor to bottom of side rails? Does the frame better accommodate a short box spring or platform for mattress?

Asked by: Mwood

Who is the manufacturer of this bed?  Also, would I be able to use a 14 inch mattress with 7 inch box spring?

Asked by: KittheFox
  • y_2020, m_9, d_24, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.12
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_37
  • loc_en_US, sid_6026, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_garnethill
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 101ms
  • QUESTIONS, PRODUCT
Product:6026-Tulip Bed